Sky-Tie® Cable Clamps and Springs |
|||||||||
|
|||||||||
|
Sky-Tie Clamp
The Adalet Sky-Tie quarter-bend cable clamp is used as both a support and as an anchor in installation where bus-drop cable transmits power from bus-duct to machine tools. It is a simple, effective and amazingly easy-to-install device to support bus-drop cable at a 90? angle. It affords an efficient means of anchoring the cable at the bus-way and at the machine tool and can also be used to suspend portable tools, air lines, etc.
"Duplex" Component
The Adalet “Duplex” fitting was developed as a component of the Sky-Tie quarter-bend cable clamp. It is a converter piece which assembles inside the Sky-Tie to grip a loop of cable. This is the most efficient and easiest-to-install device available for the handling of excess cable. This component saves cutting when machines are moved to new locations. It also permits economical stocking of standard cable lengths for use throughout the plant.
Sky-Tie Springs
Heavy-duty Sky-Tie springs insure tautness of the cable while absorbing vibrations and shocks. Each spring slips into the Sky-Tie clamp at its outside bend (or if using the SHD Duplex, the converter’s outside bend) and ties back to a structural member. Three spring models are available with maximum load capacities of 60, 70 and 160 pounds. |
|||||||||
|
|
|||||||||
|
|
|||||||||
